Rooms and occupied spaces: what to measure, and where it goes.
Indoor air, ventilation, odor, vaping, room pressure, warehouse air, grow rooms and server rooms.
Office, conference room or open plan
Indoor air (CO₂, TVOC, particulates, temperature, humidity)
Sound familiar? “Tenants keep asking whether the air is OK.”
| Sensors | |
|---|---|
| Where it goes | On a wall in the breathing zone, about 0.9 to 1.8 m (3 to 6 ft) high, away from doors, windows, supply diffusers, printers and people’s direct breath. |
| How it mounts | Wall mount; battery or DC power. |
| How many | One per room or open-plan zone; an engineer sizes large floors at the assessment |
| What it reads | CO₂, TVOC, PM2.5, PM10, temperature, humidity, pressure, light and motion |
| What it catches | Under-ventilation, pollutant sources, comfort complaints |
| What you get | Room-level evidence for ventilation and comfort questions |
| Pairs with |
Classroom
CO₂ and temperature
| Sensor | |
|---|---|
| Where it goes | On a wall in the breathing zone, away from the door and the unit ventilator discharge. |
| How it mounts | Wall mount; display optional. |
| How many | One per classroom |
| What it reads | CO₂, temperature and humidity |
| What it catches | Under-ventilated rooms |
| What you get | Room-by-room ventilation evidence for the district |
| Pairs with |
Restroom
Odor (ammonia, hydrogen sulfide) and occupancy
| Sensors | |
|---|---|
| Where it goes | Odor sensor on the wall in the room, away from the exhaust grille; occupancy sensor on the ceiling or wall within its 3.5 m range. |
| How it mounts | Battery powered; no camera. |
| How many | One odor sensor per restroom; one occupancy sensor per room or stall |
| What it reads | Ammonia, hydrogen sulfide, temperature and humidity; occupied or vacant |
| What it catches | Odor events; cleaning needed by use |
| What you get | Cleaning on use and odor instead of the clock |
School restroom or locker room
Vape events
| Sensor | |
|---|---|
| Where it goes | On the ceiling in the room, away from the exhaust fan. |
| How it mounts | Ceiling mount; no camera. |
| How many | Set per room at the assessment |
| What it reads | Vaping events |
| What it catches | Vaping |
Isolation or pressurized room
Room-to-corridor pressure
| Sensor | |
|---|---|
| Where it goes | Sensor at the room door, with the reference tube through the wall to the corridor or anteroom. |
| How it mounts | Wall mount; tubing through a sleeve. |
| How many | One per pressurized room |
| What it reads | Differential pressure (Pa) |
| What it catches | Loss of the pressure relationship from doors or exhaust faults |
| What you get | A continuous pressure record for the infection-prevention team |
| Pairs with |
Warehouse, dock or forklift area
Carbon monoxide and particulates
| Sensors | |
|---|---|
| Where it goes | Carbon monoxide detector on a column near the dock and the charging or propane areas; particulate monitor at a fixed point. |
| How it mounts | Screw mount; battery powered. |
| How many | One carbon monoxide detector per zone; particulate points set at the assessment |
| What it reads | Carbon monoxide; particulates |
| What it catches | Forklift exhaust building up; dust |
Grow room (indoor agriculture)
CO₂ (high range), temperature and humidity
| Sensor | |
|---|---|
| Where it goes | At canopy height, away from CO₂ injection points and fans. |
| How it mounts | Wall, pole or DIN rail; IP65. |
| How many | One per room or zone |
| What it reads | CO₂, temperature, humidity and pressure |
| What it catches | CO₂ enrichment off; humidity out of range |
Server room or IT closet
Leak and temperature
| Sensors | |
|---|---|
| Where it goes | Rope around the base of the CRAC or split unit, along the raised-floor perimeter and under condensate lines; temperature and humidity at rack inlet height. |
| How it mounts | Clips for the rope; adhesive for the room sensor. |
| How many | One rope and one or two temperature sensors per room |
| What it reads | Water; temperature; humidity |
| What it catches | Condensate leaks, cooling failure |
| What you get | Uptime evidence on a cellular data path |
Placement and quantities are starting points from Cognituv’s install guidance. A Cognituv engineer confirms them for your site, and the product data sheet governs. Electrical and hazardous-area work follows the site’s own rules and permits.
Have an equipment list?
Upload it in the planner. It suggests what to measure on each asset and a gateway to carry it, and a Cognituv engineer confirms the plan.
Prefer to talk? Call 1-888-580-8738