Dust collectors: what to measure, and where it goes.
Bag pressure drop, fan current, pulse-jet pressure and hopper level on a dust collector or baghouse.
Dust collector or baghouse
Fan current, as a sign of airflow
| Sensor | |
|---|---|
| Where it goes | A 250 A clamp on one phase of the collector fan motor feeder; the radio outside the panel. |
| How it mounts | Split-core; an electrician installs. |
| How many | One per collector fan |
| What it reads | Current (A) and amp-hours |
| What it catches | Loss of airflow, which matters most in combustible-dust systems |
| What you get | An early sign that a collector has stopped pulling air |
| Pairs with |
Bag pressure drop
Sound familiar? “We only service the dust collector when it starts acting up.”
| Sensor | |
|---|---|
| Where it goes | Taps in the clean-air and dirty-air plenums, with the tubing sloped so dust and condensate drain back. |
| How it mounts | Sensor body outside the collector. Check the area classification first (combustible dust). |
| How many | One per collector |
| What it reads | Differential pressure |
| What it catches | Blinded bags, a torn bag (a sudden drop), cleaning failure |
| What you get | Bag cleaning and bag changes on condition |
| Pairs with |
Pulse-jet cleaning air pressure
| Sensor | |
|---|---|
| Where it goes | On the pulse-jet cleaning header, not only the plant header. |
| How it mounts | 1/4-in. NPT tap. |
| How many | One per collector |
| What it reads | Gauge pressure |
| What it catches | Weak pulse cleaning |
Dust collector hopper
Hopper level
| Sensors | |
|---|---|
| Where it goes | Top of the hopper, aimed clear of the walls and the inlet stream. |
| How it mounts | Tank thread or bracket. |
| How many | One per hopper |
| What it reads | Level, as distance to the surface |
| What it catches | Material backing up into the bags |
Placement and quantities are starting points from Cognituv’s install guidance. A Cognituv engineer confirms them for your site, and the product data sheet governs. Electrical and hazardous-area work follows the site’s own rules and permits.
Have an equipment list?
Upload it in the planner. It suggests what to measure on each asset and a gateway to carry it, and a Cognituv engineer confirms the plan.
Prefer to talk? Call 1-888-580-8738