Energy & utilities · No. 14
250 A smart current sensor
CGUV-ENGY-MILE-002
Clamps around one conductor and reports amps and amp-hours; the detachable radio mounts outside a metal panel. Typical uses are individual presses, molders, sorter drives, dust-collector fans and defrost heaters.
- 250 A split-core
- ±1% (> 5 A)
- Self-powered
- Detachable radio
Specifications
At a glance.
| Measures | Current and amp-hours on one conductor |
|---|---|
| Range | 250 A split-core; ±1% above 5 A |
| Mount | Clamp on the conductor; radio outside the panel |
| Rating | Indoor |
| Power | Self-powered; no battery |
| sub-meter | |
| SKU | CGUV-ENGY-MILE-002 |
Confirm site suitability, calibration and current product specifications before ordering. The product data sheet governs.
Request the data sheet →Where it fits
Typical places for the 250 A smart current sensor.
Food & beverage
Dust-collector fan; defrost heaters; single compressors
General manufacturing
Collector fans; individual press feeders
Automotive
Individual press and molder feeders
Warehousing & distribution
Sorter-drive and conveyor-zone feeders; electric defrost heaters
Recommended for
More in energy & utilities
All energy & utilities →
12-channel electrical sub-meter
CGUV-ENGY-EWAT-001DIN-rail sub-meter with snap-on clamps and voltage inputs, reporting kW, kWh, power factor and reactive power for each circuit, so energy can be allocated by line, shop or room.12 channelskWh · kW · PFUp to 600 ASpecs and usesEnergy & utilities
3-phase current meter, 1000 A
CGUV-ENGY-MILE-004Three 1000 A split-core clamps for main feeders and large motor control centers, showing the plant's load profile by shift. Split-core clamps install without disconnecting conductors.3 × 1000 A±1%Self-powered or DCSpecs and usesEnergy & utilities
Pulse counter
CGUV-ENGY-MILE-005Turns the plant's existing water, gas, steam and electric meters into wireless meters, so water use can be tracked by line and gas use by oven batch.Pulse / S0 inputIP675-yr batterySpecs and usesPut the 250 A smart current sensor to work.
The planner builds a gateway and sensor schedule around the problem you want to see. A Cognituv engineer confirms placement and coverage, then sends a quote.