Process, rooms & cold chain
Differential pressure, rooms & filters
Low-range wireless differential-pressure sensor for filter banks, collector bags, booths, coils and rooms, with temperature and humidity on board. A rapid change in pressure says more than the absolute value.
- No. 23
- Differential
- Filters · bags · rooms
- + temperature & RH
- Indoor
Specifications
| Measures | Differential pressure; temperature; humidity |
|---|---|
| Use | Collector bags, filter banks, room and booth pressure, evaporator coils |
| Mount | Wall, with tubing to each side |
| Rating | Indoor |
| Power | Battery |
| Catalog | Cognituv Connect No. 23 |
Confirm site suitability, calibration and current product specifications before ordering. The product data sheet governs.
Request the data sheet →What you see in Cognituv Connect
Pressure changes across filters or collector bags
Differential-pressure trends help compare filter conditions over time.
How Cognituv Connect works →Where it’s used
Food & beverage
Collector bags, sifter vents, RTE room pressure, evaporator coils
General manufacturing
Fume and dust collectors, blast and paint booths, baghouses
Automotive
Paint-booth and oven pressure, filter banks, fume collectors
Warehousing & distribution
Across evaporator coils (frost)
Recommended for
Pairs with
Cognituv treatmentCognituv GridLogs pressure drop across the cooling coil before and after Cognituv Grid goes in, on the same chart.
No. 65Duct air velocity sensorDuct air velocity shows whether a rising pressure drop is cutting the airflow delivered.
No. 14250 A smart current sensorCollector fan current alongside bag pressure separates a fan problem from loaded bags.
More in process, rooms & cold chain
All process, rooms & cold chain →
Pipe pressure sensor, 0–16 bar
Gauge pressure on chilled-water, cooling-water and process lines, to 16 bar.0–16 bar (232 psi)±0.5% FSIP65Specs and usesProcess, rooms & cold chain
Tilt & position sensor
Angle and movement on dock levelers, conveyors, hoists and rack uprights.±90° range±1°IP67Specs and usesProcess, rooms & cold chain
Radar level sensor
Non-contact level for tanks, sumps and silos, less affected by dust and steam.0.3–12 m±2 mm typ.8° beamSpecs and usesPlan a system around it.
The planner builds a gateway and sensor schedule around the problem you want to see. A Cognituv engineer confirms placement and coverage, then sends a quote.