Energy & utilities
Duct air velocity sensor
A battery-powered LoRaWAN sensor with a thermal insertion probe that measures air velocity in ducts, air handlers and other critical airflow paths. Probe lengths run from 100 mm to 600 mm to suit the duct size.
- No. 65
- 0–40 m/s
- 100–600 mm probes
- Battery powered
Specifications
| Measures | Air velocity (thermal anemometer) |
|---|---|
| Range | 0 to 40 m/s |
| Mount | Probe inserted into a duct or air handler |
| Rating | IP40, indoor |
| Power | Battery (lithium), about 3 years (manufacturer rating) |
| Versions | 100, 200, 300, 400, 500 or 600 mm probe |
| Catalog | Cognituv Connect No. 65 |
Confirm site suitability, calibration and current product specifications before ordering. The product data sheet governs.
Request the data sheet →What you see in Cognituv Connect
Has air velocity in this duct dropped since the system was commissioned?
It reads Air velocity (thermal anemometer)
How Cognituv Connect works →Where it’s used
Offices & commercial real estate
Air handlers, supply and return ducts
Healthcare
Air handlers serving clinical areas
Life sciences
Lab supply and exhaust ducts
Data centers
Ducted cooling supply and return
Recommended for
Pairs with
No. 23Differential pressure, rooms & filtersPressure drop across the filter bank or coil shows where airflow is being lost.
Cognituv treatmentCognituv GridAir velocity measured before and after Cognituv Grid goes in gives an airflow record for the treated coil.
Cognituv treatmentIn-Duct UV-CAir velocity in the treated duct is logged before and after In-Duct UV-C is fitted, so any change in airflow shows on the same chart.
More in energy & utilities
All energy & utilities →Energy & utilities
Analog input sensor
Reads a 0–10 V or 0–20 mA analog signal and sends it over LoRaWAN.0–10 V / 0–20 mABattery poweredSpecs and usesEnergy & utilities
Two-input meter pulse reader
Reads pulse outputs from up to two water, gas, electric or heat meters.IP682 pulse inputsLeak, tamper and flow alertsSpecs and usesEnergy & utilities
Plant-room Modbus bridge
Two RS-485 channels bring Modbus meters and HVAC controllers onto LoRaWAN.Modbus RTURS-48512–24 V DCSpecs and usesPlan a system around it.
The planner builds a gateway and sensor schedule around the problem you want to see. A Cognituv engineer confirms placement and coverage, then sends a quote.