Energy & utilities
Two-input meter pulse reader
A sealed, battery-powered LoRaWAN interface that counts pulses from up to two existing water, gas, electric or heat meters. It can raise alerts for leaks, tampering and high or low flow, and mounts on a DIN rail, wall or pole near the meter.
- No. 66
- IP68
- 2 pulse inputs
- Leak, tamper and flow alerts
Specifications
| Reads | Pulses from water, gas, electric and heat meters |
|---|---|
| Inputs | 2 pulse inputs: dry contact, reed, S0 or open collector |
| Mount | DIN rail, wall or pole |
| Rating | IP68; −25 to 70 °C |
| Power | Battery, about 15 years in a typical configuration (manufacturer rating) |
| Catalog | Cognituv Connect No. 66 |
Confirm site suitability, calibration and current product specifications before ordering. The product data sheet governs.
Request the data sheet →What you see in Cognituv Connect
Is water running in a building or tenant space when it should be closed?
It reads Pulses from water, gas, electric and heat meters
How Cognituv Connect works →Where it’s used
Offices & commercial real estate
Utility rooms, tenant water and gas meters
Hospitality
Kitchen and laundry water and gas meters
General manufacturing
Process water and gas meters
Government
Building-level water and gas meters
Recommended for
Pairs with
No. 34Spot leak detectorA spot leak probe at the water heater or drain pan shows where water is going when the meter says it’s flowing.
No. 214Battery-powered valve controllerWhere a plumber has fitted a latching solenoid valve, a valve controller lets staff close it from the dashboard after a leak alert.
More in energy & utilities
All energy & utilities →Energy & utilities
Duct air velocity sensor
Measures air velocity in ducts and air handlers, 0 to 40 m/s.0–40 m/s100–600 mm probesBattery poweredSpecs and usesEnergy & utilities
Analog input sensor
Reads a 0–10 V or 0–20 mA analog signal and sends it over LoRaWAN.0–10 V / 0–20 mABattery poweredSpecs and usesEnergy & utilities
Self-powered power monitor
Self-powered three-phase monitor for voltage, current, power factor and kWh.Self-poweredThree-phaseV · A · PF · kWhSpecs and usesPlan a system around it.
The planner builds a gateway and sensor schedule around the problem you want to see. A Cognituv engineer confirms placement and coverage, then sends a quote.