UV-C water treatment and monitoring
Water Treatment: Treat water in the pipe or the tank.
Cognituv treats potable, process and cooling water with UV-C and no chemical additives, and logs water quality with wireless sensors and Cognituv Connect.
The problem and our answer
The problem
Tanks, loops and cooling systems are built-in breeding grounds for microbes and biofilm. Chemical programs cost money to buy, store and handle, and too often a water problem only shows up after it has already cost you.
Our answer
UV-C treats the water itself, continuously, with no chemical additives. Built-in sensors confirm the lamps are delivering, and water-quality probes stream into Cognituv Connect, so you know the water is in range.
Why it matters
What Water Treatment does for you.
Fewer chemicals to manage
Treat with light instead of additives, with less to buy, store, handle and document.
Treatment that never clocks out
Water is treated as it flows through the pipe or while it sits in the tank.
Know the lamps are working
An integrated UV-C sensor watches lamp output and raises maintenance alerts before treatment falls off.
Water quality logged
pH, ORP, conductivity and more stream into Cognituv Connect, with alerts on excursions and reports ready for audits.
Find the right fit
In-line UV-C
Stainless UV-C vessels that treat water as it flows through the pipe, in three sizes to match your design flow.
Tank UV-C
Submersible UV-C that mounts through the tank wall to treat stored water in tanks, cisterns and process vessels.
Water-quality monitoring
Wireless probes for pH, ORP, conductivity, dissolved oxygen, turbidity and residual chlorine.
Leak and level sensing
Leak detection and tank-level sensors, with alerts in Cognituv Connect.
Identify · Apply · Verify™
How it works with Cognituv.
Identify
Water-quality probes set the baseline: what’s in the water today, and where it drifts.
Apply
In-line or tank UV-C sized to the flow and the vessel, with no chemical additives.
Verify
Lamp output and water quality keep streaming into Cognituv Connect, with alerts and audit-ready records.
Where it’s used

Cooling towers
Cooling towers are warm, wet and open to the air, which suits biofilm and Legionella. Cognituv adds UV-C to the recirculating water and logs water quality in Cognituv Connect.
See Cooling towersPools, spas & water parks
Pools, spas and splash features see heavy use and warm water. UV-C adds treatment that leaves no residual, and Cognituv Connect logs water quality.
See Pools, spas & water parks
Other places it’s used
Aquaculture
Recirculating systems carry pathogens and algae through every tank. UV-C on the recirculation loop treats the water without adding chemicals to the system, and sensors log pH, dissolved oxygen and temperature in Cognituv Connect.
Drinking water
Point-of-entry and point-of-use UV-C treats potable water without changing its taste or odor. It goes after filtration, because particles can shield microorganisms from UV-C.
Graywater reuse
Filtered graywater can serve irrigation and toilet flushing. UV-C adds a disinfection step without adding chemicals, and level and leak sensors watch the storage tanks.
Wastewater
UV-C is a common final disinfection step for treated wastewater because it leaves no chemical residual in the discharge.
Aquariums and display tanks
UV-C on the filtration loop helps control algae and free-floating microorganisms, alongside water-quality monitoring.
Residential water
Whole-house UV-C after a sediment filter treats well or municipal water where it enters the home.
Residential
The evidence
How you’ll know it works.
Water quality on the record
pH, ORP, conductivity and more stream into Cognituv Connect, with alerts on excursions and reports ready for audits.
Water-quality sensor →Lamp output, watched
An integrated UV-C sensor watches lamp output and raises maintenance alerts before treatment falls off.
UV-C irradiance sensor →Published research
A 2024 review of 58 studies on UV and biofilm across water, healthcare and food safety found that methods vary widely. That’s why Cognituv measures on your own system.
Gora et al., 2024 →
Before you ask
Common questions about Water Treatment.
- Does UV-C leave a residual?
- No. UV-C adds no chemicals and leaves no residual, so it’s often paired with a disinfectant residual where codes require one.
- Do we need filtration first?
- Usually. UV-C works best on clear water, because particles can shield microorganisms from the light, so it goes after filtration.
- Can it go on a cooling tower loop?
- Yes. In-line UV-C treats the loop as it circulates, alongside your water treatment program, and probes log pH, ORP and conductivity in Cognituv Connect.
- How is it sized?
- In-line vessels come in three sizes to match your design flow, and tank units mount through the tank wall. Send us the flow, the pipe or tank and what’s in the water, and we size the unit to it.
- What maintenance does it need?
- Lamp changes and keeping the quartz sleeves clean. Lamps are changed on a schedule, or when Connect’s UV-C sensors show output has dropped.
Is UV-C right for your water system?
Start with a no-cost assessment: a call with an engineer and a written recommendation. We’ll size it to your equipment, or tell you what fits better.
Prefer to talk? Call 1-888-580-8738