Environment & water
Water-quality converter
Connects up to three RS485 probes to the dashboard for pH, ORP, conductivity, dissolved oxygen, turbidity, residual chlorine or temperature. For treated water, CIP final rinse and effluent.
- No. 35
- pH · ORP · chlorine
- Conductivity · DO · turbidity
- Up to 3 probes
- Battery
Specifications
| Measures | Probe-dependent: pH, ORP, conductivity/TDS, DO, turbidity, residual chlorine, temperature |
|---|---|
| Probes | 1–3 RS485 probes, quoted with the application |
| Mount | Wall or post by the sample point |
| Rating | Outdoor; −40 to 85 °C |
| Power | Battery |
| Catalog | Cognituv Connect No. 35 |
Confirm site suitability, calibration and current product specifications before ordering. The product data sheet governs.
Request the data sheet →What you see in Cognituv Connect
Is effluent pH staying inside its set range between grab samples?
It reads Probe-dependent: pH, ORP, conductivity/TDS, DO, turbidity, residual chlorine, temperature
How Cognituv Connect works →Where it’s used
Food & beverage
Treated-water line, CIP final rinse
General manufacturing
Effluent line (pH, conductivity) for the permit file
Automotive
Pre-treatment baths
Recommended for
More in environment & water
All environment & water →Environment & water
Spot leak detector
A point probe for one spot: a drain pan, a defrost drain or a roof-drain pit.Point probe1.5 m leadIP67Specs and usesEnvironment & water
Zone leak detector
Senses water anywhere along its cable, under chillers and in switchgear rooms.3 m ropeIP6710-yr batterySpecs and usesEnvironment & water
Weather station, 11 parameters
Wind, rain, solar, lightning, temperature, humidity and pressure on one mast.Wind · rain · solarLightning · temp · RH · baroIP67Specs and usesPlan a system around it.
The planner builds a gateway and sensor schedule around the problem you want to see. A Cognituv engineer confirms placement and coverage, then sends a quote.