Energy & utilities

Water flow meter, DN25

In-line turbine meter for 1-inch lines, reporting flow rate and total volume, so washdown, CIP, rinse, make-up and shower water can be measured by shift.

  • No. 19
  • DN25 (1 in.)
  • 2–100 L/min
  • ±5%
  • 5-yr battery
MEASURESFlow rate and totalvolumeMOUNTIn-line; G 1-inchthread (parallel pipethread, not NPT)ILLUSTRATION
Illustration. The data sheet shows the exact unit.

Specifications

MeasuresFlow rate and total volume
Range2–100 L/min on DN25
MountIn-line; G 1-inch thread (parallel pipe thread, not NPT)
Accuracy±5%
RatingOutdoor; −40 to 85 °C operating
PowerBattery, about 5 years
VersionsDN15 (½ in.), 1–30 L/min; DN20 (¾ in.), 1–60 L/min; DN25 (1 in.), 2–100 L/min; DN50 (2 in.), 10–300 L/min
CatalogCognituv Connect No. 19

Confirm site suitability, calibration and current product specifications before ordering. The product data sheet governs.

Request the data sheet →

What you see in Cognituv Connect

Is water flowing overnight when the line is shut down?

It reads Flow rate and total volume

How Cognituv Connect works →
ENERGY & UTILITIESNormal rangeTimeFlow rateAlertTrends and alerts in Cognituv ConnectILLUSTRATION ENERGY & UTILITIESNormal rangeTimeFlow rateAlertTrends and alerts in Cognituv ConnectILLUSTRATION

Where it’s used

  • Food & beverage

    Washdown, CIP, rinse and make-up lines

  • General manufacturing

    Fresh-water and shower lines; quench make-up

  • Automotive

    Wash and pre-treat make-up

Recommended for

Plan a system around it.

The planner builds a gateway and sensor schedule around the problem you want to see. A Cognituv engineer confirms placement and coverage, then sends a quote.

Add it to a system plan