Energy & utilities · No. 18
Differential pressure, air & gas
CGUV-PRES-ELLN-001
Industrial differential-pressure sensor across compressed-air filters, dryers and separators, the pressure-drop measurement DOE uses as a baseline. Filters can be changed on measured pressure drop instead of a schedule.
- Differential
- ±0.2% span
- ⅛" NPT
- IP66
Specifications
At a glance.
| Measures | Differential pressure and temperature |
|---|---|
| Media | Air, gas |
| Connection | ⅛-inch NPT female, two ports |
| Accuracy | ±0.2% of span |
| Rating | IP66; battery |
| SKU | CGUV-PRES-ELLN-001 |
Confirm site suitability, calibration and current product specifications before ordering. The product data sheet governs.
Request the data sheet →Where it fits
Typical places for the differential pressure, air & gas.
Food & beverage
Across filters and dryer at the bottling compressor room
General manufacturing
Across filters and dryer
Automotive
Across filters and dryer by shop
Warehousing & distribution
Across the compressor-room filters
Recommended for
More in energy & utilities
All energy & utilities →Energy & utilities
12-channel electrical sub-meter
CGUV-ENGY-EWAT-001DIN-rail sub-meter with snap-on clamps and voltage inputs, reporting kW, kWh, power factor and reactive power for each circuit, so energy can be allocated by line, shop or room.12 channelskWh · kW · PFUp to 600 ASpecs and usesEnergy & utilities
250 A smart current sensor
CGUV-ENGY-MILE-002Clamps around one conductor and reports amps and amp-hours; the detachable radio mounts outside a metal panel. Typical uses are individual presses, molders, sorter drives, dust-collector fans and defrost heaters.250 A split-core±1% (> 5 A)Self-poweredSpecs and usesEnergy & utilities
3-phase current meter, 1000 A
CGUV-ENGY-MILE-004Three 1000 A split-core clamps for main feeders and large motor control centers, showing the plant's load profile by shift. Split-core clamps install without disconnecting conductors.3 × 1000 A±1%Self-powered or DCSpecs and usesPut the differential pressure, air & gas to work.
The planner builds a gateway and sensor schedule around the problem you want to see. A Cognituv engineer confirms placement and coverage, then sends a quote.