Energy & utilities
Analog input sensor
A battery-powered LoRaWAN sensor with an analog input that reads a 0–10 V or 0–20 mA signal, such as the output of a voltage or current transducer. It brings wired analog readings onto the same wireless network as other sensors.
- No. 64
- 0–10 V / 0–20 mA
- Battery powered
Specifications
| Reads | Voltage or current as a 0–10 V or 0–20 mA signal |
|---|---|
| Inputs | Analog, 0–10 V or 0–20 mA |
| Radio | LoRaWAN (North America) |
| Power | Battery (lithium), about 3 years (manufacturer rating) |
| Catalog | Cognituv Connect No. 64 |
Confirm site suitability, calibration and current product specifications before ordering. The product data sheet governs.
Request the data sheet →What you see in Cognituv Connect
What is the existing transducer or drive output reading right now?
It reads Voltage or current as a 0–10 V or 0–20 mA signal
How Cognituv Connect works →Where it’s used
General manufacturing
Transducer outputs on panels and process skids
Offices & commercial real estate
Plant room drives and meters with analog outputs
Power generation
Auxiliary panels and transducer outputs
Recommended for
More in energy & utilities
All energy & utilities →Energy & utilities
SDI-12 probe converter
Battery LoRaWAN converter for SDI-12 soil, weather and environmental probes.SDI-12Battery rated about 5 years−40 to 85 °CSpecs and usesEnergy & utilities
Plant-room Modbus bridge
Two RS-485 channels bring Modbus meters and HVAC controllers onto LoRaWAN.Modbus RTURS-48512–24 V DCSpecs and usesEnergy & utilities
Two-input meter pulse reader
Reads pulse outputs from up to two water, gas, electric or heat meters.IP682 pulse inputsLeak, tamper and flow alertsSpecs and usesPlan a system around it.
The planner builds a gateway and sensor schedule around the problem you want to see. A Cognituv engineer confirms placement and coverage, then sends a quote.