Tanks, silos and meters: what to measure, and where it goes.
Level in tanks, silos and fuel tanks, and readings from the utility meters a site already has.
Utility meter (water, gas, electric, steam)
Consumption from the meter’s pulse output
| Sensor | |
|---|---|
| Where it goes | Beside the meter, wired to its pulse or dry-contact output. |
| How it mounts | No meter work; check the pulse value (units per pulse) with the utility or on the meter plate. |
| How many | One per meter, up to the device’s inputs |
| What it reads | Pulse count, as cumulative volume or energy |
| What it catches | Leaks, after-hours use |
| What you get | Utility use by operating period, reconciled to the bill |
Liquid tank (water, oil, chemical)
Level
Sound familiar? “We walk the tanks to check levels, and in between it’s a guess.”
| Sensor | |
|---|---|
| Where it goes | On the tank top on a 1½-in. G or NPT thread or a wall bracket, square to the surface and clear of the fill stream, agitator, ladders and internal structures. |
| How it mounts | Allow for the 8° beam and the 0.3 m dead zone. |
| How many | One per tank |
| What it reads | Distance to the surface, as level (0.3 to 12 m) |
| What it catches | Overfill, running dry, leaks |
| What you get | A level reading between operator rounds |
Silo or bin (grain, powder)
Level
| Sensor | |
|---|---|
| Where it goes | Above the silo, facing down, aimed clear of the fill stream and the walls. |
| How it mounts | Top mount; outdoor-rated. |
| How many | One per silo |
| What it reads | Distance, as level (to 40 m) |
| What it catches | Running empty, overfill |
| What you get | Inventory without climbing |
Fuel tank
Level
| Sensor | |
|---|---|
| Where it goes | Threads into a 2-in. BSP port on the tank top. |
| How it mounts | IP67; battery powered. |
| How many | One per tank |
| What it reads | Distance, as level (0.12 to 4 m) |
| What it catches | Running out of fuel |
Placement and quantities are starting points from Cognituv’s install guidance. A Cognituv engineer confirms them for your site, and the product data sheet governs. Electrical and hazardous-area work follows the site’s own rules and permits.
Have an equipment list?
Upload it in the planner. It suggests what to measure on each asset and a gateway to carry it, and a Cognituv engineer confirms the plan.
Prefer to talk? Call 1-888-580-8738