Energy & utilities
Pulse and status counter
A battery-powered LoRaWAN device with three inputs that each count S0 pulses from electricity, gas, water or heat meters or report a contact as open or closed. One device can cover both metering and equipment status, and it is set up over USB.
- No. 68
- 3 inputs
- Pulse or open/closed
- Battery powered
Specifications
| Reads | S0 meter pulses and contact open/closed status |
|---|---|
| Inputs | 3 inputs, each set to pulse count or change of state |
| Rating | IP40 |
| Power | Battery (lithium), about 3 years (manufacturer rating) |
| Catalog | Cognituv Connect No. 68 |
Confirm site suitability, calibration and current product specifications before ordering. The product data sheet governs.
Request the data sheet →What you see in Cognituv Connect
How many hours did the boiler or pump run, and how much gas or water did it use?
It reads S0 meter pulses and contact open/closed status
How Cognituv Connect works →Where it’s used
Offices & commercial real estate
Plant rooms with meters and run contacts
Education
Boiler and pump rooms
Hospitality
Kitchen gas and laundry water meters
General manufacturing
Utility meters and machine run signals
Recommended for
More in energy & utilities
All energy & utilities →Energy & utilities
Self-powered power monitor
Self-powered three-phase monitor for voltage, current, power factor and kWh.Self-poweredThree-phaseV · A · PF · kWhSpecs and usesEnergy & utilities
Environmental sensor data node
Carries readings from outdoor environmental probes at parks and job sites.Analog or digital sensorsLoRaWANOutdoor sitesSpecs and usesEnergy & utilities
Duct air velocity sensor
Measures air velocity in ducts and air handlers, 0 to 40 m/s.0–40 m/s100–600 mm probesBattery poweredSpecs and usesPlan a system around it.
The planner builds a gateway and sensor schedule around the problem you want to see. A Cognituv engineer confirms placement and coverage, then sends a quote.