Rotating equipment & heat
Strain & load sensor
A battery-powered wireless strain sensor that reads elongation and force on a structural member. It goes on silos and other structures where load or weight is monitored.
- No. 49
- Strain · load
- IP67
- Battery powered
Specifications
| Measures | Strain (elongation) and force |
|---|---|
| Range | −45 to +90 µm elongation (−30 to +60 N) |
| Radio | LoRaWAN (North America) |
| Rating | IP67; −10 to 50 °C operating |
| Power | Battery (alkaline) |
| Catalog | Cognituv Connect No. 49 |
Confirm site suitability, calibration and current product specifications before ordering. The product data sheet governs.
Request the data sheet →What you see in Cognituv Connect
Did the load on this support change after the last delivery?
It reads Strain (elongation) and force
How Cognituv Connect works →Where it’s used
Food & beverage
Silo legs, hoppers
Construction
Beams, braces, temporary works
General manufacturing
Racks, frames, load-bearing supports
Recommended for
More in rotating equipment & heat
All rotating equipment & heat →Rotating equipment & heat
Two-channel thermocouple sensor
Two thermocouple probes for hot equipment and process points up to 375 °C.2 thermocouple channels−40 to 375 °CMagnet mountSpecs and usesRotating equipment & heat
Linear position sensor
Wireless linear position sensor for crack, joint and actuator travel.0 to 100 mm stroke0.2% accuracyIP67Specs and usesRotating equipment & heat
Smart current sensor, 100 A
Self-powered 100 A clamp-on current sensor for a single live wire.Up to 100 ASelf-poweredIP30 indoorSpecs and usesPlan a system around it.
The planner builds a gateway and sensor schedule around the problem you want to see. A Cognituv engineer confirms placement and coverage, then sends a quote.