Book an assessment

Why Cognituv

Results measured on your own equipment.

Facilities hear plenty of promises: savings estimates, efficiency claims, payback models. Cognituv replaces them with measurement.

Hygiene automation

Hygiene that doesn’t wait for a schedule.

Most facility hygiene is manual and periodic: coils cleaned once a year, filters changed on a schedule, a swab when someone complains. Between visits, nobody knows what the coil, the room or the water is doing.

Cognituv makes it continuous. Wireless sensors watch the conditions that matter, treatment engineered for each coil, room, line or stream runs at the source, and Cognituv Connect records the result. UV-C is one of our tools, alongside photocatalytic oxidation, filtration and the sensors that watch all of it.

Manual hygieneHygiene automation
Cleaned on a scheduleTreated at the source, all the time
Checked when someone complainsWatched by sensors, with alerts when something drifts
One size from a catalogEngineered for each coil, room, line or stream
No record between visitsEvery reading logged against your own baseline
Manual hygieneChecked when someone complainsCleaned on a scheduleHygiene automationEvery reading loggedYour own baselineTreated at the source, all the timeILLUSTRATIONManual hygieneChecked when someone complainsCleaned on a scheduleHygiene automationEvery reading loggedYour own baselineTreated at the source, all the timeILLUSTRATION

Measure before you commit

When a decision needs data, Cognituv Connect measures your own equipment first, from smart CTs and IAQ monitors to vibration sensors. We recommend what the data supports, and nothing more.

One accountable partner

Hardware, install, software, and verification under one roof. No finger-pointing between the sensor vendor, the integrator and the analytics company, because they’re all us.

How hygiene automation works

Identify · Apply · Verify™

The same three steps on every project: find what’s costing you, treat it at the source, and measure the result against your own baseline.

  1. Identify

    A call with an engineer about the coils, rooms or lines involved. Where you want proof first, Cognituv Connect sets a measured baseline, scoped and quoted for your site.

  2. Apply

    Treatment sized to each coil, duct, room, line or stream: Cognituv Grid, in-duct, FreshFilter, water and gas systems, installed with minimal time offline.

  3. Verify

    With Cognituv Connect, results are measured against that baseline and exported audit-ready for rebates, ESG reporting and renewals.

Illustration with sample data.See Cognituv Connect live

How we work

Designed for your site, checked before it ships.

We start from published research. See the research we use →

  1. Review the research

    We check peer-reviewed research and published dose data for your application before recommending anything.

  2. Design and simulate

    Lamp layout and dose are modeled with ray-tracing and airflow tools before anything is built.

  3. Build and check

    Systems are built to your design and checked with calibrated UV-C instruments before they ship.

  4. Install and document

    You get an installation guide, user manual and maintenance plan for your specific setup.

Three divisions

The same method for buildings, gas and water.

Rendering

Facilities Management

Energy, IAQ, uptime, and water for commercial and mission-critical buildings.

See Facilities Management
Rendering

Premium Gas Solutions

Gas conditioning for natural gas and RNG streams.

See Premium Gas Solutions
Rendering

Water Treatment

UV-C treatment and water-quality monitoring for potable, process and cooling water.

See Water Treatment

Built to be audited

Made in registered facilities.

Produced in an EPA-registered establishment · EPA Device Producer #100510-TX-1

Manufactured in an FDA-registered facility

Trusted by

Start with a no-cost facility assessment.

A call with an engineer, then a written recommendation for treatment, monitoring or both, sized to your equipment.

Book an assessment